On this page
- What a COA is, and who issues it
- The header: lab, license and "Regulatory Compliance Testing"
- Batch and sample identification
- Dates and sample history
- Potency: THC, THCA and the total THC formula
- Total THC = THC + (0.877 × THCA)
- Other cannabinoids
- The safety panels
- Reading the result codes
- The overall pass or fail
- Red flags to watch for
- Frequently asked questions
- Sources
Quick answer: A certificate of analysis (COA) is the lab report for one batch of a cannabis product. In California it must show who tested the product, which batch was tested, how much of each major cannabinoid it contains, and whether it passed every required safety test. To use one, first check that the batch number on the COA matches the batch number on your package, then look at the overall pass or fail, then read the potency section.
Every legal cannabis product sold in California has to pass state-required testing before it can reach a dispensary shelf. We explain how that process works in Cannabis Testing Standards in California. This guide covers what comes after: how to actually read the report. It's for adults 21 and over who want to know what's in the bottle.
What a COA is, and who issues it
A COA is issued by a state-licensed testing laboratory, not by the brand. The rules for it are in the Department of Cannabis Control (DCC) regulations, California Code of Regulations Title 4, Division 19. [10] Under those regulations, a licensed lab tests each representative sample for cannabinoids, foreign material, heavy metals, microbial impurities, mycotoxins, moisture content and water activity, residual pesticides, and residual solvents and processing chemicals, plus terpenoids where applicable. [1] Every one of those results is reported on the COA. [1]
Proof's batches are tested by SC Labs, an independent, state-licensed lab that is ISO/IEC 17025 accredited.
The header: lab, license and "Regulatory Compliance Testing"
Start at the top of the page. California's rules say a compliance COA must carry the words "Regulatory Compliance Testing" in the upper right corner of each page. [2] The header area also has to identify:
- The laboratory: its name, licensed premises address and license number. [2]
- The licensees involved: the distributor that had the batch sampled, and the cultivator or manufacturer that made it, each with a license number. [2]
Batch and sample identification
This is the section that ties the report to the product in your hand.
- Batch number: the COA lists the batch number of the batch that was sampled. For packaged products, the regulations require the batch number on the label to match the COA. [2]
- Sample identifiers: the matrix type (for example, a tincture, capsule or topical) and the lab's unique sample ID. [2]
- Unit count: for cannabis products, the number of units in the representative sample and in the whole batch. [2]
- Photo: a picture of the sample, showing the packaging when the product was sampled pre-packaged. [2]
How to match a COA to your package
- Find the batch number printed on your package. On most products it's on the side or bottom label, near the packaging date.
- Find the batch number on the COA.
- Make sure they're identical, character for character. A COA for a different batch of the same product tells you about that other batch, not yours.
For Proof products, you can type your package's batch number into the batch lookup on our lab testing page. It takes you to that batch on the product's results page, such as Bazillion Drops lab results. Those pages show Proof's summary of each 2026 batch's results. If you'd like the full SC Labs report, or the report for an older batch, send us the batch number with the COA request form and we'll email it to you.
Dates and sample history
A COA records when the sample was collected, when the lab received it, when it was analyzed, and the results that go with those dates. [2] The report must also be signed and dated by a supervisory or management employee of the lab. [2]
Read the dates in order: collection, then receipt, then analysis, then the signature. They should run forward in time.
Potency: THC, THCA and the total THC formula
The cannabinoid section is the one most people come for. California requires the lab to report THC, THCA, CBD and CBDA as percentages, plus total THC and total CBD where applicable. [3] The lab also reports those compounds in milligrams per gram or per milliliter, and reports THC and CBD in milligrams per package and per serving. [3]
Why there's an acid form
Cannabis plants make cannabinoids mainly in their acid forms, such as THCA and CBDA. Heat converts them into THC and CBD. When an acid form converts, it loses part of its molecule, so 1 mg of THCA doesn't become 1 mg of THC.
The total THC formula
California's regulation spells out the math. Total cannabinoid concentration is the acid form multiplied by 0.877, plus the neutral form. [3] For THC:
Total THC = THC + (0.877 × THCA)
Total CBD works the same way: CBD + (0.877 × CBDA). [3]
A hypothetical example: if a sample measured 1 mg/g THC and 20 mg/g THCA, its total THC would be 1 + (0.877 × 20) = 18.54 mg/g.
Total THC and total CBD are the numbers to compare with the label. California allows a label's cannabinoid content to differ from the COA result by up to plus or minus 10.0% and still be considered accurate. [3] Proof's results pages explain this the same way: the totals count both forms, adjusted for the weight lost in conversion, and that's the number that matches your label.
Other cannabinoids
Labs must report any other cannabinoids they analyze, as a percentage and in mg/g or mg/mL. [3] Depending on the product, you may see CBN, CBG, THCV, CBC and CBDV. For a product sold on a minor cannabinoid, such as a CBN or CBG formula, this is where you check that it's there in the amount the label claims.
The safety panels
Each safety test is reported as pass or fail. [2] Here is what each one covers.
Residual solvents and processing chemicals
This checks for chemicals that may be left behind by extraction or processing. Category I includes compounds such as benzene, chloroform and methylene chloride, with very low action levels. Category II includes solvents such as butane, ethanol, methanol and hexane, with higher limits. [4] The ethanol limit doesn't apply to tinctures, and the ethanol or isopropyl alcohol limit doesn't apply to topicals. [4]
Pesticides
Category I pesticides must not be detected at all. Category II pesticides each have an action level, set separately for inhalable and non-inhalable products, and the sample passes only if every result stays at or below it. [5]
Heavy metals
The lab tests for cadmium, lead, arsenic and mercury. Limits differ for inhalable and non-inhalable products. [6]
Mycotoxins
These are toxins made by certain molds. The panel covers aflatoxins B1, B2, G1 and G2 (combined) and ochratoxin A, each with a limit of 20 µg/kg. [7]
Microbial impurities
Every product is tested for Shiga toxin-producing E. coli and Salmonella. Inhalable products are also tested for four pathogenic Aspergillus species. A sample passes only if none is detected. [8]
Moisture and water activity
These apply to specific product types. Dried flower is tested for water activity (limit 0.65) and has its moisture reported as a percentage. Solid edibles are tested for water activity (limit 0.85). [9] On a tincture, capsule or topical COA, you may see this panel marked as not tested, which is normal.
Foreign material
This is an inspection for things that shouldn't be in the product. It's one of the required tests. [1]
Reading the result codes
A few short codes appear throughout a COA:
- ND (not detected): the analyte was not detected, or was below the lab's limit of detection. [2]
- NT (not tested): the lab didn't run that test. [2]
- <LOQ: the analyte was detected but was below the lab's limit of quantitation, so it couldn't be measured precisely.
The COA must list the analytical methods, instruments, and limits of detection and quantitation that the lab used. [2]
The overall pass or fail
Every compliance COA must state an overall pass or fail for the whole batch. [2] If a sample fails a required test, the entire batch fails and can't be released for retail sale. [3] [5] [8]
Red flags to watch for
- The batch numbers don't match. The COA has to match the batch on your package. [2]
- No license number for the lab, or no "Regulatory Compliance Testing" header. [2]
- Missing panels. A required safety test marked NT where it should have been run.
- Potency far from the label. Total THC or CBD more than 10% away from what the package says. [3]
- Dates out of order, or no signature from the lab. [2]
- No overall pass. If the report says fail, or doesn't give an overall result, the batch shouldn't be on a shelf. [2]
- A report that looks edited. Mismatched fonts or numbers that don't add up are worth questioning. When in doubt, ask the brand for the report directly.
Frequently asked questions
Where do I find the batch number on a Proof product?
It's printed on the package label. Enter it in the batch lookup on our lab testing page to see that batch's results.
Can I get the full COA for my Proof product?
Yes. Send the batch number through the COA request form and we'll email you that batch's full SC Labs report, including batches from before 2026.
Why is total THC lower than THC plus THCA?
Because THCA loses part of its weight when it converts to THC. California's formula multiplies THCA by 0.877 before adding it to THC. [3]
Sources
- California Code of Regulations, Title 4, § 15714, Required Testing. https://www.law.cornell.edu/regulations/california/4-CCR-15714
- California Code of Regulations, Title 4, § 15726, Certificate of Analysis (COA). https://www.law.cornell.edu/regulations/california/4-CCR-15726
- California Code of Regulations, Title 4, § 15724, Cannabinoid Testing. https://www.law.cornell.edu/regulations/california/4-CCR-15724
- California Code of Regulations, Title 4, § 15718, Residual Solvents and Processing Chemicals Testing. https://www.law.cornell.edu/regulations/california/4-CCR-15718
- California Code of Regulations, Title 4, § 15719, Residual Pesticides Testing. https://www.law.cornell.edu/regulations/california/4-CCR-15719
- California Code of Regulations, Title 4, § 15723, Heavy Metals Testing. https://www.law.cornell.edu/regulations/california/4-CCR-15723
- California Code of Regulations, Title 4, § 15721, Mycotoxin Testing. https://www.law.cornell.edu/regulations/california/4-CCR-15721
- California Code of Regulations, Title 4, § 15720, Microbial Impurities Testing. https://www.law.cornell.edu/regulations/california/4-CCR-15720
- California Code of Regulations, Title 4, § 15717, Moisture Content and Water Activity Testing. https://www.law.cornell.edu/regulations/california/4-CCR-15717
- Department of Cannabis Control, DCC Regulations. https://cannabis.ca.gov/cannabis-laws/dcc-regulations/
- Lab testing
- COA
- California cannabis
For adults 21+ only. Cannabis affects everyone differently. Product descriptions and anticipated effects are provided for informational purposes only and may vary by individual. Proof products are not intended to diagnose, treat, cure, or prevent any disease or medical condition. Consult a healthcare professional regarding cannabis use and your individual health needs.









